LifeLites, LLC
3D Bar 1L with clip (side opening)
Custom designed 3D resin printed 1L clip (side opening) with 6.5mm bar...
$0.15
3D Bar 1L with two clips (side opening)
Custom designed 3D resin printed 1L double clip (side opening). Center to Center of clip openings is..
$0.20
3D Bar 1.5L with two clips (side opening)
Custom designed 3D resin printed 1.6L double clip (side opening). End to end outside measurement is ..
$0.32
3D Bar 2L with two clips (side opening)
Custom designed 3D resin printed 2L double clip (side opening). Center to Center of clip openings is..
$0.35
eLite Advanced Kit
Back in stock! Ready to ship as early as 2023/06/12The eLite Advanced is the smallest, most versatil..
$32.99
eLite Basic Kit
The eLite Basic Full Kit is as fun and simple as they come! The main unit features eight outputs fo..
$19.99
3D Brake Wheel 12.8mm
Custom designed 3D resin printed 12.8mm brake wheel. Includes stud and bar hole connections...
$0.45
3D Clip Double (end opening 90 degree)
Custom designed 3D resin printed U clip with 90 degrees offset...
$0.20
Circuit Cubes to NanoLite Adapter
Connect NanoLite and Studly Trains Motors to Circuit Cubes!Compatibility:NanoLite Series, Studly Tra..
$5.99
eLite 6 Inch LED Cable - Blue
Need that extra cable to finish a project? No worries, we've got you covered. Build them into your c..
$1.99
eLite 6 Inch LED Cable - Green
Need that extra cable to finish a project? No worries, we've got you covered. Build them into your c..
$1.99
eLite 6 Inch LED Cable - Orange
Need that extra cable to finish a project? No worries, we've got you covered. Build them into your c..
$1.99
eLite 6 Inch LED Cable - Red
Need that extra cable to finish a project? No worries, we've got you covered. Build them into your c..
$1.99
eLite 6 Inch LED Cable - Warm White
Need that extra cable to finish a project? No worries, we've got you covered. Build them into your c..
$1.99
eLite Basic MCU
Main control unit of the eLite Basic. A total of eight LED cables can be plugged directly into the u..
$9.99
eLite Battery Box AAA
2xAAA battery box features power connector with female pins for use with eLite Series MCUs (not eLit..
$2.99
eLite Blinking LED Cable - Blue
Need that extra cable to finish a project? No worries, we've got you covered. Build them into your c..
$1.99
eLite Blinking LED Cable - MultiColor
Need that extra cable to finish a project? No worries, we've got you covered. Build them into your c..
$1.99
eLite Blinking LED Cable - Red
Need that extra cable to finish a project? No worries, we've got you covered. Build them into your c..
$1.99
eLite Blinking LED Cable - White
Need that extra cable to finish a project? No worries, we've got you covered. Build them into your c..
$1.99
eLite Candle Flicker LED Cable
Need that extra cable to finish a project? No worries, we've got you covered. Build them into your c..
$1.99
eLite Double Extension Cable
Add and extra port to your eLite with this handy two outlet extension cable.1 - 6 inch Double Extens..
$2.99
eLite Double LED Cable - Warm White
Need that extra cable to finish a project? No worries, we've got you covered. Build them into your c..
$2.99
eLite Double LED Cable - White
Need that extra cable to finish a project? No worries, we've got you covered. Build them into your c..
$2.99
eLite Extension Cable - 12 inch
LED cables or battery box cables not quite long enough? No problem! These extension cables will help..
$1.99
eLite Extension Cable - 24 inch
LED cables or battery box cables not quite long enough? No problem! These extension cables will help..
$1.99
eLite Extension Cable - 6 inch
LED cables or battery box cables not quite long enough? No problem! These extension cables will help..
$1.99
eLite Jumper Cable - 12 inch
Use the jumper cable to connect eLite units or Modulites together in a daisy chain configuration.Pro..
$1.99
eLite Jumper Cable - 6 inch
Use the jumper cable to connect eLite units or Modulites together in a daisy chain configuration.Pro..
$1.99
eLite ModuLite - Warm White
Extend your ModuLites with extra Modules! Daisy chain up to 32 per strand. Does not include a ..
$2.99
eLite PostLite LED Cable - Amber Candle Flicker
The PostLite cable combines a 6 inch LED cable with a 12 inch Extension cable. Daisy-chain up to 32 ..
$2.99
eLite PostLite LED Cable - Warm White
The PostLite cable combines a 6 inch LED cable with a 12 inch Extension cable. Daisy-chain up to 32 ..
$2.99
eLite StudLite 1x1 - Blue
Standard 3mm LED won't fit? Having a hard time fitting the wiring in a tight place? Try a StudLite! ..
$2.99
eLite StudLite 1x1 - Green
Standard 3mm LED won't fit? Having a hard time fitting the wiring in a tight place? Try a StudLite! ..
$2.99
eLite StudLite 1x1 - Red
Standard 3mm LED won't fit? Having a hard time fitting the wiring in a tight place? Try a StudLite! ..
$2.99
eLite StudLite 1x1 - Warm White
Standard 3mm LED won't fit? Having a hard time fitting the wiring in a tight place? Try a StudLite! ..
$2.99
eLite StudLite 1x1 - White
Standard 3mm LED won't fit? Having a hard time fitting the wiring in a tight place? Try a StudLite! ..
$2.99
eLite StudLite 1x6
Standard 3mm LED won't fit? Having a hard time fitting the wiring in a tight place? Try a StudLite! ..
$4.99
eLite StudLite 1x6
Standard 3mm LED won't fit? Having a hard time fitting the wiring in a tight place? Try a StudLite! ..
$4.99
eLite StudLite 1x6 EV - Blue
Standard 3mm LED won't fit? Having a hard time fitting the wiring in a tight place? Try a StudLite! ..
$4.99
eLite StudLite 1x6 EV - Red
Standard 3mm LED won't fit? Having a hard time fitting the wiring in a tight place? Try a StudLite! ..
$4.99
eLite StudLite 1x6 EV - Red/Blue
Standard 3mm LED won't fit? Having a hard time fitting the wiring in a tight place? Try a StudLite! ..
$4.99
eLite StudLite 1x6 EV - Warm White
Standard 3mm LED won't fit? Having a hard time fitting the wiring in a tight place? Try a StudLite! ..
$4.99
NanoLite 12 Inch LED Cable - Warm White
The NanoLite LED cable features a 36 gauge cable attached to a tiny FPC and LED for even smaller b..
$2.49
NanoLite 18 Inch LED Cable - Warm White
The NanoLite LED cable features a 36 gauge cable attached to a tiny FPC and LED for even smaller b..
$2.49
NanoLite 2 Port LED Expander
A 2 outlet MultiPort board for use with NanoLite LEDs and NanoModuLites. Also features 2 power ports..
$2.99
NanoLite 24 Inch LED Cable - Warm White
The NanoLite LED cable features a 36 gauge cable attached to a tiny FPC and LED for even smaller b..
$2.49
NanoLite Basic Starter Kit
Welcome to expandable NanoLites! NanoPods features 4 light outputs and comes with 4 white LED NanoLi..
$14.99
NanoLite Jr Basic Kit
The smallest LifeLites lighting kit! The NanoLite Jr Basic features 4 outputs and comes with 4 white..
$19.99
Specialty - Lamp Post White
In Conjunction with BrickForge [link] we are pleased to announce an injection molded lamp post for l..
$1.00
Specialty - Power Coupling
Easily distribute power under your city streets with our Power Couplings. Mount these to baseplates ..
$9.99
Specialty - USB Power Adapter
Our newly designed power adapter is ready to power up your eLites and NanoLites! Integrated ON/OFF s..
$9.99
3D Bell - Large
Custom designed 3D printed part. Allow up to 2 business days manufacture time.Bell made from 5 indiv..
$2.49
3D Bell - Small
Custom designed 3D printed part. Allow up to 2 business days manufacture time.Bell made from 5 indiv..
$1.49
3D Bracket 1x1 Reverse Top
Custom designed 3D printed part. Allow up to 2 business days manufacture time...
$0.50
3D Brick 1x1 with 2 Recessed Studs
Custom designed 3D printed part. Allow up to 2 business days manufacture time...
$0.55
3D Plate 1x1 Round with Bottom Clip
Custom designed 3D printed part. Allow up to 2 business days manufacture time...
$0.25
3D Plate 1x1 Round with Horizontal Clip
Custom designed 3D printed part. Allow up to 2 business days manufacture time...
$0.40
3D Plate 1x1 Round with Top Clip
Custom designed 3D printed part. Allow up to 2 business days manufacture time...
$0.25
3D Plate 1x1 Round with Vertical Clip
Custom designed 3D printed part. Allow up to 2 business days manufacture time...
$0.40
3D Plate 1x2 Round with Vertical Axle Hole
Custom designed 3D printed part. Allow up to 2 business days manufacture time...
$0.55
3D Plate 2x2 Bearing Center
Custom designed 3D printed part. Allow up to 2 business days manufacture time.Designed for use with ..
$1.35
3D Plate 2x2 Bearing Offset
Custom designed 3D printed part. Allow up to 2 business days manufacture time.Designed for use with ..
$1.20
3D Slope Curved 1x1 8mm
Custom designed 3D printed part. Allow up to 2 business days manufacture time.Dimensions are 8x8x8mm..
$0.40
3D Slope Curved 1x2 8mm
Custom designed 3D printed part. Allow up to 2 business days manufacture time.Dimensions are 8x16x8m..
$0.65
3D Slope Curved 1x6 Double with 7 Studs
Custom designed 3D resin printed 1x6 curved brick with 7 studs.Great for making curved roofs on trai..
$2.85
3D Slope Curved 1x8 Double with 9 studs
Custom designed 3D resin printed 1x8 curved brick with 9 studs.Great for making curved roofs on trai..
$3.50
3D Slope Curved 3x1 with 3 studs
Custom designed 3D resin printed 3x1 curved slope with 3 studs.Great for making curved roofs on trai..
$1.40
3D Slope Curved 4x1 with 4 Studs
Custom designed 3D resin printed 4x1 curved slope with 4 studs.Great for making curved roofs on trai..
$1.55
3D Stud with Bottom Clip
Custom designed 3D printed part. Allow up to 2 business days manufacture time...
$0.20
3D Wheel No2 solid with 2mm axle hole
Custom designed 3D printed part. Allow up to 2 business days manufacture time.8.5mm wheel with 2mm a..
$0.99
3D Wheel No4 solid with 2mm axle hole
Custom designed 3D printed part. Allow up to 2 business days manufacture time.14.4mm wheel with 2mm ..
$1.49
3D Wheel No6 solid with 2mm axle hole
Custom designed 3D printed part. Allow up to 2 business days manufacture time.20.8mm wheel with 2mm ..
$2.99
3D Wheel No7 solid with 2mm axle hole
Custom designed 3D printed part. Allow up to 2 business days manufacture time.24mm wheel with 2mm ax..
$2.99
3D Whistle - 1 tone
Custom designed 3D printed part. Allow up to 2 business days manufacture time.Base made to fit hollo..
$0.55
3D Whistle - 3 tone
Custom designed 3D printed part. Allow up to 2 business days manufacture time.Base made to fit hollo..
$0.70
eLite 12 Inch LED Cable - Blue
Need that extra cable to finish a project? No worries, we've got you covered. Build them into your..
$1.99
eLite 12 Inch LED Cable - Green
Need that extra cable to finish a project? No worries, we've got you covered. Build them into your..
$1.99
eLite 12 Inch LED Cable - Orange
Need that extra cable to finish a project? No worries, we've got you covered. Build them into your..
$1.99
eLite 12 Inch LED Cable - Red
Need that extra cable to finish a project? No worries, we've got you covered. Build them into your..
$1.99
eLite 12 Inch LED Cable - Warm White
Need that extra cable to finish a project? No worries, we've got you covered. Build them into your..
$1.99
eLite 12 Inch LED Cable - White
Need that extra cable to finish a project? No worries, we've got you covered. Build them into your c..
$1.99
NanoLite Basic Expander Kit
Welcome to expandable NanoLites! NanoLite Basic features 4 light outputs and comes with 4 white LED ..
$14.99
Specialty - NiteLite
Make your own brick-built night light! Use our NiteLite to create LEGO® inspired a room accent light..
$4.99
3D BrickTracks #10 Blind Spoked Driver
3D resin printed on-demand wheels designed by BrickTracks™! Printed with tough and resilient black U..
$6.00
3D BrickTracks #10 Blind Spoked Driver
3D resin printed on-demand wheels designed by BrickTracks™! Printed with tough and resilient black U..
$6.00
3D BrickTracks #10 Flanged Spoked Driver
3D resin printed on-demand wheels designed by BrickTracks™! Printed with tough and resilient black U..
$6.00
3D BrickTracks #12 Blind Spoked Driver
3D resin printed on-demand wheels designed by BrickTracks™! Printed with tough and resilient black U..
$6.00
3D BrickTracks #12 Flanged Spoked Driver
3D resin printed on-demand wheels designed by BrickTracks™! Printed with tough and resilient black U..
$6.00
3D BrickTracks #4 Flanged Solid Wheel
3D resin printed on-demand wheels designed by BrickTracks™! Printed with tough and resilient black U..
$2.00
3D BrickTracks #6 Blind Solid Wheel
3D resin printed on-demand wheels designed by BrickTracks™! Printed with tough and resilient black U..
$3.00
3D BrickTracks #6 Flanged Solid Wheel
3D resin printed on-demand wheels designed by BrickTracks™! Printed with tough and resilient black U..
$3.00
3D BrickTracks #7 Flanged Solid Wheel
3D resin printed on-demand wheels designed by BrickTracks™! Printed with tough and resilient black U..
$5.00